Have you checked here?

http://www.yoyodyneti.com/Category.aspx?CategoryID=3016

I couldn't get anybody to agree which kit, if any, would repair my wonky Sport Classic clutch master and kept getting told that no Ducati repair facility is allowed to rebuild them, and hence why you can't get the parts. Brembo does not want kits sold to the general public as they can't be assured we'd put them together correctly and thus sue them in the event of rapture. I hope you can find the kits you need, if not I'd call Yoyodyne. They appear to be one of the best sources for Brembo. I ordered my new master replacement from them.

 

Google says, http://www.loudbikestore.com/037054...mm-ducati-2v-belt-drive-twins-750-f1-and-later-2v-belt-drive-twins-p-12789.html



But then again I saw a post made elsewhere stating that Brembo used a 16mm master for you bike, and it is the 16mm kits you just can't seem to find.

 

Thanks; I'll try to figure out if that is the right one for my brake. My shop says that the brake and clutch cylinders have different piston sizes and thus have different rebuild kits. It's the clutch one I need most badly.

PhilB

 

Did you figure this out??



Phil - Did you get to the bottom of this as I am feeling that my front Master Brake cyl is getting a little wonky as well???
Or are you just gonna buy the used set on the post above??
Thanks -
DavidK

 

I was reading the most clutch masters are 12mm, only trouble is that there seems to be about 10 different 12mm kits.

I do wish they'd simplify this as I was pissed off to need a $230 master cylinder for a bike that only has 8,000 miles. $30 should be all it takes to repack the damn thing.

 

I just took off my OEM brake and clutch assemblies from my 93 M900.

(I replaced them with Brembo Gp components.)

I am going to sell both of them. They work perfectly. Bolt on and go.

PM me

Fred

 

Hi,

I have bought this kit 3 years ago for my clutch master cylinder on my M900 from 1995 so I'm pretty sure this is what you need...

https://store.bevelheaven.com/brake...ted-parts/brembo-13mm-clutch/brake-m|c-kit-fits-all-hollow-pivot-lever-type-mc/

Hop this helps

 

this the same for a 94 m600?

mine is in need of doing

if not what kit is?

 

Hi PhilB,

I have double checked this is exactly what you need...clutch master cylinder with cofin style reservoir is 13mm and front brake master cylinder is 16 mm.

 

Thank you very much, sir.

PhilB

 

Q_M - You ROCK...
I'll be doing some ordering soon!!
Thanks so much -
This is why I love this forum!!
DavidK

 

Q_M - You ROCK...
I'll be doing some ordering soon!!
Thanks so much -
This is why I love this forum!!
DavidK

Great research!
Markus

 

Oh - wait - did you mean to say the front Master is a 15mm?? - I did not see a 16mm rebuild kit on the site...
Thanks again

 

Hi david-K,

On a M900, the brake master cylinder is supposed to be a 16mm sized (to go with two 4 pistons caliper)

On the bevel Heaven site, they do not seem to have the rebuilt kit for a cofin style brake master cylinder 16mm...But if I were you, I would give them a call to see if they can get one for you...

And to answer Disco_Frank's question, I am not sure what size is the clutch master cylinder on a M600 of 1994...But my guess would be that most probably it is the same size than a M900 (13 mm) because the oil line is quite the same length and that the clutch slave cylinder is pretty much the same...But you should do some research on that matter and keep us informed here on this forum.

It is good to know that I can be of good help to other Ducati monster's fan...

Do not hesitate if you have other questions on other subject...I know almost everything on Carburated M900...

 

Thanks all - I communicated with Steve from Bevel Heaven and this our communication...
Please read from Bottom to top...
Looks like I need a whole Master as there are NO Brembo supplied 16mm rebuild kits....
DavidK


Absolutely - would be nice if you directly link to my site........ etc thanks

Steve Allen www.BevelHeaven.com
www.Store.BevelHeaven.com www.Forum.BevelHeaven.com
925.798.BEVL(2385) PO Box 340 Concord CA 94522-0340 USA
www.twitter.com/bevelheaven www.facebook.com/bevel.heaven


-----Original Message-----
From: David Kirscher [mailto:drdavidk@IFE.comcastbiz.net]
Sent: Monday, June 25, 2012 10:48 PM
To: Steve @ Bevel Heaven
Subject: Re: Old Monster Brake probs...

You sir just ROCK!!
Thanks so much - Is it OK if I post tis onto a Ducati Monster forum site for all to see??
David
On Jun 25, 2012, at 10:40 PM, Steve @ Bevel Heaven wrote:

> Hi david, it's real simple to determine.. All your clutches are 13mm
> and use this kit here
> https://store.bevelheaven.com/brake-related-parts/brembo-13mm-clutch/b
> rake-m
> |c-kit-fits-all-hollow-pivot-lever-type-mc/
>
> If your bike has only 1 caliper up front, then you use the same exact
> kit to do the brake as well.
>
> If your bike has 2 calipers, then you have a 16mm master cylinder and
> there is no kit available for you. Brembo doesn't/won't supply one.
> Luckily I do stock new 16mm Master cylinders for reasonable, see
> below, you can order with silver or black levers etc..
> https://store.bevelheaven.com/brake-related-parts/16mm-rec-brembo-mast
> er-cyl
> inder-front-brake/
>
> Steve Allen www.BevelHeaven.com
> www.Store.BevelHeaven.com www.Forum.BevelHeaven.com
> 925.798.BEVL(2385) PO Box 340 Concord CA 94522-0340 USA
> www.twitter.com/bevelheaven www.facebook.com/bevel.heaven
>
>
> -----Original Message-----
> From: David Kirscher [mailto:drdavidk@IFE.comcastbiz.net]
> Sent: Monday, June 25, 2012 10:23 PM
> To: Shop@BevelHeaven.com
> Subject: Old Monster Brake probs...
>
> Hey -
> I found your site via a Ducati Monster forum - and there a couple of
> us trying to find Master Cylinder Rebuild kits for the "coffin" style
> Brembo Masters (both Clutch and brake).
>
> My bike is a 1995 M900 with the coffin style masters on both brake and
> clutch.
>
> Is the "re-build kit" for the 15mm Master the correct one for the
> Brake on my bike??
>
> How would I verify this??
>
> Thanks so much.
> David Kirscher

 

We did find rebuild kits available, at least for the clutch, from either Yoyodyne or from Bevel Heaven.

However, the shop that's doing the work had a pair of very lightly used MCs from a 796 (that they had replaced with fancier ones for a racebike project) that they gave me a break on. They wind up being only $50 more than doing the rebuilds, due to labor cost of rebuilding, and they are known to seal, while a rebuild might not work out if the original cylinder bores are too worn.

So I'm going with that, especially since the rebuilds would have to be ordered and take a couple extra days, while the 796 MCs can go on today, and I'm paying rent on a car until my bike is back.

It's a bit of a shame that I'll lose that bit of patina and have to have more shiny new bits on it, but I guess it can't much be helped.

PhilB

 

is that what you guys call the coffin style?

 

YES -
Notice that it would HOLD only a very SMALL vampire!!
Thanks

 

awesome thanks

and that means i need 2 kits, 1 for the clutch and 1 for the brake as i only have single front calliper

funny thing is they want $20 for a piece of tube...

 

A BUMP and
A big thanks to Steve at Bevel Heaven...
Orded my new MC (needed the whole she-bang as the 16mm MC has NO re-build kit!!) on Monday and it arrived in my mail TODAY!! Added bonus as this is the 1st weekend of riding that is predicted to be over 70 degrees!! I'll install in the AM and hope to be out in the afternoon!!
Thanks Steve!!

 

Monster brake kits

Now for the bad news. Ducati and Brembo both don't stock rebuild kits for brake and clutch cylinders. Liability issues for those who would not put them together right meant that Ducati and Brembo both agreed to only sell complete units. The clutch side for my S2R-1000 was $250.00 Welcome to the wonderful world of Italian motorcycles and repair parts.....

 

Now for the bad news. Ducati and Brembo both don't stock rebuild kits for brake and clutch cylinders. Liability issues for those who would not put them together right meant that Ducati and Brembo both agreed to only sell complete units. The clutch side for my S2R-1000 was $250.00 Welcome to the wonderful world of Italian motorcycles and repair parts.....

you still buy the repair kits, it the same like late 996 for example)
here is the link: http://www.yoyodyneti.com/category.aspx?categoryid=3016

they not exept the paypal payment method,for my sorry... but you can use the credit card.