This would be a good start

 

What Ducman suggested is actually a really good idea, i know $190 seems a bit pricey, but honestly that'll cover most of the tools you'll need to do nearly anything on your bike. Anything else you might need would be a special tool, or can be rented.

Justin

 

As to answer one of your other questions, you'll want metric. All japanese and italian bikes use metric sizing and unless you're working on a yamaha, you won't need those stupid torx tools.

 

+1 to Ducman851

If you watch you can get that exact set for $150. They frequently have it on sale at that price. I bought one at that price.

 

I suggested that one as thats whats in my box that goes to the racetrack. It also has pretty much everything youll need to perform basic tasks on your bike.

Also a few other items that would be good to add.

10mm allen socket (for oil changes)
14mm allen socket (for removing the oil creen)
21mm 6pt wrench or deep socket (for removing cover plug over oil screen)
large Adjustable wrench (also called Cresent wrench)



Ill think of more

 

This would be a good start

I have this exact set and it's great. Throw in some bigger sockets and a torque wrench for the rear wheel, a set of T-Handles, rubber mallet and screwdriver set and you've got most everything listed in the Tools part of the FAQ

http://www.ducatimonster.org/smf/index.php?topic=40123.0

 

Thanks guys. Actually that set doesn't seem like too much. I try to look at purchases as investments. If you say I'll use it forever, well then, I might as well shell out and go for it.

Although the set is in standard and I thought it was just said that I'd need metric?

 

I'm a bit partial to Craftsman hand tools too, because they have a forever warranty. This is different than a lifetime warranty (which usually means same person who purchased it new and bring your receipt). Sears does not care if you have a receipt or not - just the broken Craftsman tool to trade for a new one. I believe that Snap-On has a similar "no questions / no receipt necessary" warranty, but they are about 2x the price of Craftsman. About twice a year I break something (often it's the same something), and it's nice to just take it in and trade broken for new.

-dave

 

Look a little closer, there are just as many metrics as inch (sae).

 

Look a little closer, there are just as many metrics as inch (sae).

Right, the set includes metric and SAE sockets and wrenches, as do most tool sets these days. I'd assume in 10 years they'll be all metric and you'll have to buy SAE tools as you need them, but such is the world right now.

 

Whoops. Guess I missed the Christmas sale. Any idea the next time the prices will be good?

 

Try getting it online, sometimes they have better prices than instore and sometimes you can even will call it.

 

Thanks guys. Actually that set doesn't seem like too much. I try to look at purchases as investments. If you say I'll use it forever, well then, I might as well shell out and go for it.

Thats a good attitude - I was just about to post up warning you against buying cheap tools - there's nothing worse than losing a weekends riding 'cause your cheap allen key rounded out the head of some important screw just after all the shops closed on a Saturday afternoon... Buy good tools and look after them - it's _way_ cheaper in the long run than damaging perfectly good parts with cheap nasty tools...

Although the set is in standard and I thought it was just said that I'd need metric?

Yeah, everything on the Ducati is metric. Often though, you'll find you can buy a metric and imperial toolset for less than the price of metric only ones...

Get a manual (Haines or Snyder or Factory Ducati) if you're planning on taking apart engine parts, brake parts, or major frame/front end components. Post up here for advice if you get to places where you're not sure what you're doing. You'll need a hacksaw or sawzall and some measuring tools for the tail chop. Some people will probably suggest you get a torque wrench to make sure you tighten up the rearset bolts properly, I'd be happy enough doing them by feel.

good luck,

big

 

My favorite tool:

ok....so im not the best mechanic! [laugh]

bike stands make working on the bike easier too

get some locktite too

 

Try getting it online, sometimes they have better prices than instore and sometimes you can even will call it.

also check pawn shops!

I have seen comparable sets at Pawn shops go for peanuts!

 

My favorite tool:

WHY LIMIT YOURSELF TO THE RUBBER MALLET?

when a proper sledge will do it faster and harder in less time!

 

I am a big fan of my Snap-On tools because of the service and the fact that my Snap-On guy comes to me...I don't have to trudge out to him if something needs swapping and worry about if there is a clerk to handle the matter properly...worst case scenario..I call him up and ask him if he has one on the truck and to put it aside for me when he comes next!....and I have found personally...that my Snap-On ratchets are more serviceable and durable than my Craftsman...but it is a matter of personal feel too!

I'm a bit partial to Craftsman hand tools too, because they have a forever warranty. This is different than a lifetime warranty (which usually means same person who purchased it new and bring your receipt). Sears does not care if you have a receipt or not - just the broken Craftsman tool to trade for a new one. I believe that Snap-On has a similar "no questions / no receipt necessary" warranty, but they are about 2x the price of Craftsman. About twice a year I break something (often it's the same something), and it's nice to just take it in and trade broken for new.

-dave

 

http://www.sears.com/sr/javasr/prod...ols&pid=00934245000&vertical=TOOL&subcat=Mechanics+Tool+Sets&BV_UseBVCookie=Yes

this set you were looking @ is on sale for 199, thats 60 off, not a bad deal, plus I think they are offering free shipping

 

http://www.sears.com/sr/javasr/prod...ols&pid=00934245000&vertical=TOOL&subcat=Mechanics+Tool+Sets&BV_UseBVCookie=Yes

this set you were looking @ is on sale for 199, thats 60 off, not a bad deal, plus I think they are offering free shipping

Strangely, that set is still on sale but the $270, 263 piece set that was going for ~$180 is not. As we all know the 263 piece set must be vastly superior to the 245 piece set because it's got more... stuff.

 

SNAP-ON = $$$$$$$$$$
Craftsman tools are great and Sears is everywhere.

Don't underestimate the need for a torque wrench and lock-tite. Especially on the engine and drive train, fastener preload is important to prevent things from coming loose while your riding. Not to mention that there is not a more sickening feel that when a bolt pulls the threads out of the hole because you over-torqued.

 

SNAP-ON = $$$$$$$$$$
Craftsman tools are great and Sears is everywhere.

there is not a more sickening feel that when a bolt pulls the threads out of the hole because you over-torqued.

THERE IS 1 MORE SICKENING FEELING THAN THAT!.....as you are torqueing down a bolt and the head shears off leaving the bolt in place flush with the surface and no way to remove it easily!....sometimes easy outs work and sometimes they don't.....either way...it is always handy to have a complete tap & die set on hand!

and no one ever said Snap-On was cheap (unless you buy if from a crackhead that stole it or from the Pawn shop or from an Ebay seller that has no clue what they are really selling!)

 

http://www.ducatisuite.com/tools.html

Here is another good list of tools specific to Ducs.

 

Thanks, and wow that list is expansive.

 

dremel, just buy a dremel and a hammer....I find I use them most [thumbsup]

 

This would be a good start

OK, I just went out a couple days ago and bought this set. It's really nice to have a socket and a wrench for pretty much any situation.

When I opened up all the plastic baggies that the sockets were seperated into, I noticed that all the sockets were rough on the inside. At first I was pissed and thought that I got a bad set, but I used one of them and it seemed like the roughness was clearing up with use.

I've never bought a new set of tools before. Is this normal?