Ducati Monster Motorcycle Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
783 Posts
Discussion Starter #1
I want to replace the gray gauge face on my monster. I'm adding a DP Tach which has a white face. Does anyone know where you can get those.

Hanjin
 

·
Registered
Joined
·
1 Posts
I have the opposite problem, I have a gray tach and white speedo in 20 mph incriments with red numbers. If your gray is in 10 mph incriments, I would be happy to trade you gauge faces, and can even make the swap. I could trade you tachs, but I would prefer the gray. Otherwise, buy a new speedo from ebay and run up the miles with a drill.
 

·
Premium Member
Joined
·
6,957 Posts
two possible issues you may want to consider....
-the gauges are sealed and will need to be cut apart/re-glued to change the faces
-the 94-99 goes to 140 and the 00+ (grey) goes to 160, so the needle wouldnt line up properly with the numbers

i have a set of white aftermarket faces for the 140 speedo and tach if that works for either of you...
i think swapping tachs would be the easiest thing if that works for you guys...
 
1 - 4 of 4 Posts
Top