Ducati Monster Motorcycle Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
51 Posts
Discussion Starter · #1 ·
I am in the process of upgrading both the clutch and f. brake master cylinders from the stock "coffins" to the brembo's w/ remote reservoirs that came stock on the M900 (and others, I'm sure). I just did the top triple mod (removal of risers) and, once the paint cures for a few more days, will be re-installing it and mounting the new master cylinders. My question is this: Will I be able to retain the use of my stock lines or will I have to replace them? Are they strong and/or long enough? I have CC clip-ons, if that makes a difference in the length portion of the question.

Any info. you can provide will be gratly appreciated. Thanks in advance,
Eric
 

·
Premium Member
Joined
·
51 Posts
Discussion Starter · #7 ·
Actually, my f. brake coffin is currently operating a double front disc...must be a bigger piston in the '02 750 than the 620 single disc.

I already picked up the masters on ebay...they came off of an '01 M900...total was only $150 after shipping!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top