[Andrew_Cornett]

Does any one have a 02 or above S4 top triple clamp they want to sell or trade for a 02 620 triple clamp?

 

[Guest]

sure i have a top triple clamp off a 01 S4 is that what your looking for .

 

[Andrew_Cornett]

I am not sure yet.

 

[Guest]

same piece for both years . if you want the clamp let me know by email . thanks

 

[Guest]

that's correct. '01 & '02 are the same. and yep... should fit the m620's forks/steering stem just fine.

 

[Andrew_Cornett]

same piece for both years . if you want the clamp let me know by email . thanks

I sent you an email. I want the triple clamp you have. Thanks

 

[Guest]

andy, be sure to look at the comment i made in the other thread... the adaptor thingies cyclecat sells accomodate 50mm bore clip-ons. the ones you got for your 620 are 53mm. if they're new/unused, you may be able to work an exchange with whoever you bought them from?

 

[Andrew_Cornett]

andy, be sure to look at the comment i made in the other thread... the adaptor thingies cyclecat sells accomodate 50mm bore clip-ons. the ones you got for your 620 are 53mm. if they're new/unused, you may be able to work an exchange with whoever you bought them from?

The fork tubes on the 02 620 are 50mm and flair out about 4 inches down so the clip-ons are 50mm. The S4 triple clamp will solve all my problems with bar height. Thanks for your help.

 

[Guest]

AS MENTIONED ON THE OTHER THREAD... SMOKING CRACK SMOKING CRACK!!!!

yep... it IS 50mm and you should be fine as you already stated. d'oh!