Ducati Monster Motorcycle Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,589 Posts
To swap to the 4 piston Brembo - be they 2 or 4 pad you will need 10mm Offset rotors - 320mm diameter. I did this swap on a 620 not so long ago. Definetly more braking force availible to you.

Besides the offset issue, using a 300 mm rotor woudl be a bad idea since you'd loose a good chucnk of rotor surface area, not to mention that the pads would have a goove cut in them... not how they are supposed to work.

So long story short - you need to match up the rotor and caliper positions for proper rotor to pad contact. A machine might be able to fashion an adapator that would allow you to use the 300 mm rotors... But then you're adding another point of failure to a critical system - and micgh have clearance issues around the spokes.
 
1 - 1 of 1 Posts
Top