[Guest]

I am trying to remove my speedometer from the gauge pod that holds the speedo and warning lights.

 

[DTMsurf]

There is a small phillips head screw inside the center of the reset knob. Remove that screw and the knob, and the main cable, then pull the speedo out the front.

 

[ScottRNelson]

I ran into that same problem when trying to remove the speedometer so that I could install a tachometer, since they both went into a different face plate. You just need to find a really tiny phillips screwdriver to take the screw out of the knob. Once the knob's off the rest is easy. Be careful you don't lose the tiny screw.