Ducati Monster Motorcycle Forum banner
1 - 1 of 1 Posts

· Registered
166 Posts
I used a jig saw to cut my front fender for the main cut, cleaned up with a razor blade & a file. Should work the same for the hugger. First thing I did was to put down some masking tape and drew my cut. Cut with the jig maybe 1/4 in from line then took off remaining with a nice & sharp razor blade. I could have done a better job - but the process seems to be valid.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.