how do i remove the swingarm??

2420 Views 6 Replies 3 Participants Last post by hall, Nov 25, 2003

hall

Discussion Starter · Nov 24, 2003

so i'm trying to get my swingarm off my S4 for powdercoating...

http://www.ducatimonster.org/cgi-bin/yabb/YaBB.cgi?board=tech;action=display;num=1069036082

how do I get the rod out that holds the swingarm to the engine? i've l've remove the c-clips and the 2 allen heads on the bottom but, the rod won't slide out... i don't wanna start bangn' on something that's not coming out that way...

thanks in advance!!!

Save

1 - 1 of 7 Posts

Speeddog

· #2 · Nov 24, 2003

My OEM S4 service manual says:

Remove rear wheel.
Remove vert cyl exhaust pipe.
Remove lower bolt of shock linkage.
Loosen the pinch bolts.
Remove at least one of the circlips.
Using a drift, drive the pivot shaft out.

Don't lose your shims....

Any more questions, let me know & I'll check it out.

Save

1 - 1 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month