[Norm]

The newer frames are stiff as hell (and heavy), but gussetting around the head tube always helps. The main forces are at the bottom, so run from there. I can send you pics of a couple I've modded if that'll help. R&R on the frame won't be that tough. Take notes, use tape and/or pics, & write back here if/when you get stuck. Beer helps.

 

[Norm]

Thanks. I also did one with 2 extra 1/2" tubes coming out each side like the Jananese flag. On my own frames, I add a xcross bar behind the head tube & then center to center with the head tube. The more you add, the better, it's not an area where you can be too stiff, but you still have to be able to get in with a welder & a paint gun, something I frequently fail to consider when I design.