Exhaust Question
1 - 4 of 4 Posts
Later model Monsters have clamps, but I don't know when the change occurred, and if the slipjoint pieces are different to allow clamping.
You can get stainless steel T-bolt band clamps like this:
![]()
from here:
http://www.mcmaster.com/asp/enter.asp?pagenum=207
bottom of the page.
They look nice and can clamp the bejeezus out of stuff. You'll need to replace the nylock nut with a regular one, as the exhaust pipe gets hot enough to cook the nylon out.
You can get stainless steel T-bolt band clamps like this:
from here:
http://www.mcmaster.com/asp/enter.asp?pagenum=207
bottom of the page.
They look nice and can clamp the bejeezus out of stuff. You'll need to replace the nylock nut with a regular one, as the exhaust pipe gets hot enough to cook the nylon out.
G
Guest
·NAPA also carries those clamps at about $2.50 each.
1 - 4 of 4 Posts
