Ducati Monster Motorcycle Forum banner
1 - 3 of 3 Posts

· Premium Member
Joined
·
494 Posts
Discussion Starter · #1 ·
Well people, I ran my last dyno run today. I had K&N cones, FCR's, sil high pipes, and dyna coils. These mods made a big difference in response from my 750. I had a video shoot all worked out for a before and after but the video camera was late today so I couldn't get the dyno run from today on film. My results from today were 59.8 rwhp and 46.7 lb/ft of torque. The air fuel mixture was right on through the power band between 13-14. The carbs helped alot and I think where I am most impressed with them is in the 4.5 - 7 rpm range which is where I find myself tending to keep the revs anyway. That is great for me. Also it pulls way past 7500 to about 8 real strong which when it had the mikuni's it ran out of steam right at 7.

So the only video I got of it was the first runs with the old cans, old carbs and jet kit, and open K&N. Here that is

http://www.loudbluevolvo.com/videos/dyno-wmv9.wmv

Anyone else have dyno #'s to share?

-Patrick
 

· Premium Member
Joined
·
494 Posts
Discussion Starter · #3 ·
Re: Dyno run today

Think it was 61hp and 45lb/ft at the crank. I hate to say it but I dyno'd the bike this summer with just a open K&N, Stage II, and low mount Leo's, and got 63 hp and 47 lb/ft . Don't really know why I'm not making more power but I am still very impressed with the carbs. They are so peppy.
-Patrick
 

· Premium Member
Joined
·
494 Posts
Discussion Starter · #4 ·
Also I would like to say thank you to all of those who helped me get those carbs on, especially Chris and Andrew Cornett. I have learned a ton of information from you guys. I should be good to go.

-Patrick
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top