[Shaazzaam]

Hey guys,

Sharing my 2012 1100 EVO with the following mods:

SC Projects R60 slip on with ECU reflash
Bitubo steering damper
CRG bar end mirrors
D3 grips
Pazzo short levers
Oberon clutch master slave
Carbon fiber tank panel and key cover
Carbon fiber rear cowl
Carbon decal on gas cap (plan on swapping that out later)
Ducati Performance comfort seat
Ducati Performance 18L tail bag
Front fly screen delete
Tail tidy
Integrated tail light
LED front indicators

Plans:
Rizoma reservoirs
Rear wheel decal
Win lottery and buy more ****

Cheers,

Dan

 

[S4Rt]

Well last week I gots some new rubber put on Elvira and found out that the shock was leaking like a stuck pig. Road 2 up with 110 pound GF and sucked the plate into the rear tire. No fun. Well dropped her off (the bike, not the GF) at the shop and got her back today. Up-spring and new seal and let me tell ya....HELLZ YEAH!!! Much much better!!

 

[S4Rt]

And now for Elvira chillin at the hotel in Seaside California during WSBK....

 

[S4Rt]

And now Elvira chillin in Oakland.

 

[LuckyDuc75]

My flock of Ducs: 2007 S2R1000 and 1999 996.

 

[Montducati]

My 1200RS

Just completed mods: Custom Paint by CCR Bike, Beacon Falls, CT, OZ Wheels, Supersprox, Chain and carrier, mud guard eliminator.

 

[Ducati Jon]

Just completed mods: Custom Paint by CCR Bike, Beacon Falls, CT, OZ Wheels, Supersprox, Chain and carrier, mud guard eliminator.

Jeeeeeeesus! Impressive!

Sent from my Nexus 6 using Tapatalk

 

[Montducati]

Thanks Jon

 

[S4Rt]

Well...I finally done did it.

 

[S4Rt]

2014 Multi S Touring.

 

[Ducati Jon]

2014 Multi S Touring.

See this is why I need three bikes. Haha I'm too short for a multi though...

Sent from my Nexus 6 using Tapatalk

 

[S4Rt]

2014 Multi S Touring.

See this is why I need three bikes. Haha I'm too short for a multi though...

Sent from my Nexus 6 using Tapatalk

Oh believe me when I say I'm almost too short as well. Barely on the balls of my feet!!! So worth it though.

 

[cmross13]

i'll chime in...

2007 S4RS
Diopa Bellypan
Termi "shorty" slip on
Houston Superbikes open CF airbox w/Pipercross
Motowheels reflash
Rizoma 005 bars
Rizoma Dynamic mirror
ASV C5 levers
TPO regulator flip kit
TPO crank breather kit
DP carbon rear hugger
STM slave, pegs, frame plugs
Lockhart Phillips CF sprocket and clutch covers
Motodynamic integrated tail light
Atomic plate frame
Cox rad & oil cooler guards
Hydroturf custom seat
i dunno. some other stuff lol

 

[raebears1100evo]

Celeste-



SC Project Exhaust.
MWR power up kit, airbox mod., air filter.
Rapid Bike auto tuner.
Servoectomy-- Woodcraft servo buddy.
Shorai Lithium battery.
Oberon clutch slave.
14 tooth front sprocket and corse dynamics case saver.
Cannisterectomy, L side air deflector and oil cooler guard.
Rizoma- mirrors, fluid tanks and mounts, pegs and adapters.
SpeedyMoto- sliders- complete set, handlebars.
Evotech- tailtidy and exhaust hanger.
New Rage Cycles- 2 sets LED blinkers.
Motodynamics- tail light/integrated blinkers.
Gilles- levers and lever guards.
Ducabike- oil filler plug, rear axle nuts, seat bolts, timing port cover, sprocket carrier, top handlebar clamp and complete mounting kit for Ohlins steering damper.
Ohlins steering stabilizer.
Ohlins rear shock.
Race Tech springs and Gold valve kit for the forks. Yet to be installed.
DP clear tank protector.
Tech spec grip pads.
Valve stem covers.

Carbon Fiber- headlight cover, instrument cluster cover, key guard, front tank guard, front sprocket guard, chain guard, heel guards, rear hugger, seat cowl cap cover, exhaust heat shield, license plate frame and belt covers.

Yet to do:
At chain time- black sprocket, red cush bearings and red chain.
Carbon- complete oil cooler cover and guard, left side wire cover.
Speedymoto top triple clamp and risers, black, steering stem nut- red
A few other bits and bobs/ finishing touches.

 

[haz_bike]

2018 Standard 1200:

- Quickshifter
- Heated grips
- SC Project Conical slip on
- Rizoma Reverse Retro mirrors
- Ducabike Clear Clutch cover, plate and ring
- Ducati CF tank protector
- Evotech Tail Tidy
- Removed fork reflectors

https://scontent-sjc3-1.cdninstagram.com/vp/c6f6014e20725a8e317744df3f62df6e/5AF80581/t50.2886-16/31787050_184791775681014_4133055156941393785_n.mp4

 

[DucOki]

Ducati Monster 1100 S
No mods but I have some Rizoma Eccentrico mirrors and ends on the way. Eventually I will get an Evotech tail tidy and either a Comp Werkes exhaust or SC Project.

Cheers!

 

[Jenya]

Всем Привет!)

 

[Monster4Lee]

Hello!

That's the google translation anyway. :angel

 

[philb]

Moving day!
(At least 6 months for a job project 1500 miles from home.)
1995 M900, loaded for travel.

PhilB

 

[796BEHR]

I've made a few mods to my Monster.