Ducati Monster Motorcycle Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi,
I have been caught out at home on a hot summers day and the bike wont go. Bar humbug :-(
The problem:
I turn on the key, the gauges sweep, the immobiliser light comes on and stays on.
I have 2 black keys and 1 red key and the bike does not recoginse any of them.
I can't deactivate immobiliser using the method in the owners manual by using the throttle and flashing lights.
Could any one offer some suggestions on what theproblem could be?
(The price on the ECU in New Zealand is $2,000 and the board in the gauges is about $1600.00)

Many thanks Ivan
 

·
Registered
Joined
·
8,800 Posts
Try unhooking the battery, and turn the key on and off a couple of times to discharge any stored energy.
Reattach the battery, and try it.
This may 'reboot' the ECU.
Outside chance, but it's a free experiment. :-\

Also, try unplugging and re-plugging the connection on the 'antenna' that's mounted inside the key-switch bezel.

I'm pretty sure you can get an FIM U59 ECU cheaper than either of those prices....
 
1 - 2 of 2 Posts
Top