Ducati Monster Motorcycle Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
Hey guys,
I recently got my hands on some 1100 evo headers for my M796 and my initial plan was to get a CW slip on.
After doing some "googleing" lol i came across this video where a guy had a BMW S100RR termi and apparently the diameter is the same so only the mounting bracket had to be modified.

https://www.youtube.com/watch?v=-KZs8GJZMuY

Does anyone on here have this set up or has some more info on this?





 

Attachments

·
Registered
Joined
·
18 Posts
Discussion Starter #3
I just like the look of the side headers/exhaust better than under the seat. It cleans up the back a lot which is also what I was going for.
 

·
Registered
Joined
·
18 Posts
Discussion Starter #6
Well my previous set up was Termignoni slip-ons with ECU and filter. Loved the set up and sounded amazing. Props to the previous owner who made that happen LOL.

For this set up I also removed the servo, lambda sensors and put in plugs, so I guess I will have to re-flash the ECU and them see how it goes.
 

·
Registered
Joined
·
7 Posts
I've been wondering about this setup as well. I so badly wanted to do it to my 1100 Evo last year, but I was afraid I was going to end up wasting money on an exhaust I couldn't eventually install. I ended up going with the CW exhaust, which I like the look of it, but the sound isn't my favorite. It's more loud than anything. Not as 'smooth' as the Termi, Leo Vince, or Remus. From the video, it sounded like this shorty Termi replicated the sound I wanted very well. I might have to pull the trigger on this setup soon.
 

·
Registered
Joined
·
5 Posts
So, hey guys. There seems to be a lack of solid info on this setup and what exactly is needed to make it work and look the way it should. The example above proves that it can be done but the positioning of muffler seemed off to me, as though it's not angled upwards enough.

Let me back up. I picked up an 1100 Evo a couple months ago and after looking at exhausts, the only one that interested me was the CW because it allowed for elimination of the never-used passenger pegs. I had been waiting to pick one up (I mean, it's not like they're going anywhere), and in the meantime I stumbled into this thread, and boy am I glad I did. The Termi setup for the Evo was one I pretty quickly discounted because I don't find it terribly attractive nor is it reasonably affordable. Which is a shame, because Duc and Termi go together like PB & J.

So long story short, I took the leap after finding a decent deal on the Ebay. It showed up yesterday, as described, and my excitement to get it on the bike quickly faded as I discovered that out of the box, that's basically impossible. First of all, it wouldn't fit over/into the stock connector without some heavy coaxing, which I didn't bother with because secondly, that would position it directly into the rear wheel.

Instead, I took the bike over to a trusted exhaust shop. Here's what needed to happen:

1. They fabbed a new connector to transition between the stock header and the Termi unit, which both acts as a sizing adaptor AND repositions the can so it aims more outward and upward. The positioning is pretty subjective, and I went with what looked good to me, obviously.

2. This is the bigger one. The bracket attached to the exhaust is so far forward that to position the can properly would put the mounting hole behind/forward of the brake pedal/mount. I'm not getting super descriptive here except to say that it would be difficult to accommodate it in that position, so some surgery was required. We cut essentially the whole bracket off, then rewelded just the endpoint so that it was directly above the muffler instead of far in front. This allowed for a new bracket to be created that, similar to the CW one, hangs off the bolts for the heel guard.

Anyway, it all works, and it sounds INCREDIBLE. With the additional work it ended up being a bit more costly than the CW (I would've opted for one of the custom-order finishes) but damn, worth it.

TL-DR: see photo. I'm getting a matching clamp for the Termi side, so pardon that ugliness for now.
 

Attachments

·
Registered
Joined
·
5 Posts
Just a followup - I want to work on getting some (decent) clips soon. It's pretty loud sans baffle, and volume is not far from stock with the baffle in, but you loose some of the bass. Still trying to figure out what I prefer.

Awesome! Thank you so much for having the balls to do it and letting us know the outcome.
Thanks! Drives me crazy when people do this sort of thing but don't give any specifics.
 
1 - 12 of 12 Posts
Top