848 forks and parts for SBK fork swap - Ducati Monster Forums: Ducati Monster Motorcycle Forum
 
Thread Tools Display Modes
post #1 of 4 (permalink) Old 05-20-2014, 06:22 PM Thread Starter
Member

 
AFtriathlete's Avatar
 
Join Date: Mar 2007
Posts: 66
SOLD -- 848 forks, Renthal Clip-ons, and parts for SBK fork swap

Decided I don't want to track my Monster 796, and instead I will be looking for a 999s later this summer.

With that said, I have the following for sale:

2010 848 forks -- 53/53, ~3000 miles, good seals, great condition except for the approx 1/2" long scratch I put in them about 1/2 way down from the top when the nub on the lower triple shim bent over under the lower triple (nub dug into the fork leg basically). Strictly cosmetic and minor, and mounted on my bike it's high enough on the fork leg to be hidden, especially when you turn that side towards the inside. $325 plus shipping.

Renthal clip-ons for 53 mm forks. Brand new, just out of the packaging. Fits all SBK forks. These are 7 degree angle, 39 mm offset, zero rise, so my plan was to put them over my top triple. Goes for $180 new on Sportbiketrackgear, but I'll sell them for $130 plus shipping.


Corse Dynamics lower triple shims to shim a 54 mm lower triple (all new gen Monsters pre-2014) to hold a 53 mm SBK fork. 10$ plus shipping.


2010 848 front axle with all spacers and axle nut. I know its 25 mm with a 30 mm stepped spacer on the right side of the axle, so I know it's the right axle for several other bikes (999, HM, 1098, and probably more), but the spacers might not all be the exact correct ones for every application. $100 plus shipping.


Monster 696/796/1100 top triple -- bored out to 53 mm from 50 mm stock to accommodate 53 mm SBK forks. Machining was done professionally, and I have already mounted these to the bike with no problems with fitment just to reassure you that the job was done properly. $90 plus shipping. This was save you big over some of the aftermarket top triples out there -- you would basically just be paying for the machining and not the part itself. Currently painted with flat black enamel, but enamel paint isn't as durable as I predicted so it could either use a new coat or to just be stripped or even powder coated.


NOTE: I also still have the Bazzaz Z-Fi for sale, see my other ad for that.

Will consider reasonable offers. Parts are located in Hampton VA (23665).
Attached Thumbnails
Click image for larger version

Name:	$_57.jpg
Views:	51
Size:	93.6 KB
ID:	139753  

2005 Ducati 999
2011 Ducati Monster 796 -- V&H CS-1 slip-ons; various carbon bits; Rexxer ECU; 14T front sprocket
2009 1198 -- sold
2002 M750 -- sold

Last edited by AFtriathlete; 05-25-2014 at 05:08 PM.
AFtriathlete is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 05-20-2014, 07:34 PM Thread Starter
Member

 
AFtriathlete's Avatar
 
Join Date: Mar 2007
Posts: 66
First round of pics.
Attached Thumbnails
Click image for larger version

Name:	IMG_1687.jpg
Views:	85
Size:	94.4 KB
ID:	139649   Click image for larger version

Name:	IMG_1688.jpg
Views:	77
Size:	97.4 KB
ID:	139657   Click image for larger version

Name:	IMG_1689.jpg
Views:	77
Size:	94.5 KB
ID:	139665   Click image for larger version

Name:	IMG_1685.jpg
Views:	66
Size:	88.4 KB
ID:	139673   Click image for larger version

Name:	IMG_1686.jpg
Views:	74
Size:	95.7 KB
ID:	139681  


2005 Ducati 999
2011 Ducati Monster 796 -- V&H CS-1 slip-ons; various carbon bits; Rexxer ECU; 14T front sprocket
2009 1198 -- sold
2002 M750 -- sold
AFtriathlete is offline  
post #3 of 4 (permalink) Old 05-20-2014, 07:36 PM Thread Starter
Member

 
AFtriathlete's Avatar
 
Join Date: Mar 2007
Posts: 66
Second round.
Attached Thumbnails
Click image for larger version

Name:	IMG_1683.jpg
Views:	62
Size:	88.5 KB
ID:	139689   Click image for larger version

Name:	IMG_1684.jpg
Views:	65
Size:	93.0 KB
ID:	139697   Click image for larger version

Name:	IMG_1681.jpg
Views:	67
Size:	89.3 KB
ID:	139705   Click image for larger version

Name:	IMG_1682.jpg
Views:	72
Size:	91.9 KB
ID:	139713  

2005 Ducati 999
2011 Ducati Monster 796 -- V&H CS-1 slip-ons; various carbon bits; Rexxer ECU; 14T front sprocket
2009 1198 -- sold
2002 M750 -- sold
AFtriathlete is offline  
Sponsored Links
Advertisement
 
post #4 of 4 (permalink) Old 05-25-2014, 05:08 PM Thread Starter
Member

 
AFtriathlete's Avatar
 
Join Date: Mar 2007
Posts: 66
All parts sold.

2005 Ducati 999
2011 Ducati Monster 796 -- V&H CS-1 slip-ons; various carbon bits; Rexxer ECU; 14T front sprocket
2009 1198 -- sold
2002 M750 -- sold
AFtriathlete is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ducati Monster Forums: Ducati Monster Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome