|Topic Review (Newest First)|
|04-25-2019 03:00 PM|
Originally Posted by TECKNORACE View Post
|04-23-2019 11:12 PM|
Originally Posted by Homer View Post
|04-23-2019 11:03 PM|
|04-23-2019 10:41 PM|
|TECKNORACE||Hi guys I produced this tank for monster what you think|
|04-22-2019 08:48 AM|
I’d be interested in a tank with extended range/ air box delete. My ride is an 04 with steel tank, so ethanol swelling not an issue.
If there were a capacity of at least 5 to 5 1/2 gal. I’d be in.
|04-18-2019 10:46 AM|
Homer's '08 Tricolore Tank is on R and R
Hi Chris. Is the S*R tank project still alive?
Sadly, I just pulled the tank off my 2008 S4RS Tricolore to let it rest while I look the bike over closely for the cause of combustion gasses in the radiator.
I was surprised how large it has grown. I'm hoping to put a new tank on it. I'll be ordering repair and service parts as soon as I finish my inspections.
Head gaskets, Belts, Shims, etc... Thank you for being there for the Ducatisti !!!
|04-13-2019 12:37 PM|
|chris||Maybe side conversations should split to a new thread?|
|04-13-2019 01:01 AM|
Originally Posted by cmross13 View Post
Care to elaborate?
I'd be more than interested to hear about what you have in mind and how it goes.
|04-08-2019 10:12 PM|
Originally Posted by breaddrink View Post
im going to send two steel tanks and one S4RS tank to Italy to see what i can have made...
|03-30-2019 06:42 PM|
I have someone local who can coat a tank interior, and a very tempting price on a new tank from Italy..
It's extra tempting as mine has a rock chip, a key gouge (harder to see) and a little point on the black stripe is showing paper at the front.. May have polished through.
So, it would take care of some cosmetic stuff in my head.
On the fence, as I know some still have tanks deform after caswell coating..
I would love to see this avenue prosper, but it feels a little like it's stalled.
|This thread has more than 10 replies. Click here to review the whole thread.|