Ducati Monster Forums: Ducati Monster Motorcycle Forum - Reply to Topic
Thread: installing a new pressure plate, some questions Reply to Thread
Title:
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now



In order to be able to post messages on the Ducati Monster Forums: Ducati Monster Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
04-28-2008 03:55 PM
johnc
Re: installing a new pressure plate, some questions

also, and i am sure sr. moore simply forgot to mention this important step ... (note: only for non-slipper style dry clutches)

look at the stock pressure plate before you remove it ... there will be a mark (usually a triangle or dot) cast into the outer surface next to one of the spring cups ... you need to install the new pressure plate (which will also have a mark) in the same orientation / location. this is because stock clutches (non-slipper style) are keyed to fit a specific direction.
04-28-2008 11:11 AM
mmoore
Re: installing a new pressure plate, some questions

Fixed it for ya.

My advice on the pressure plate is this;

- cross pattern is good.
- compressing the springs is NBD
- use a torque wrench. It's easy to break those little cap head screws (ask me how I know )
- The back of the pressure plate should have a dot or mark on it. Be sure to line this dot or mark up with the post that has a slot in it.
- check the bearing in the plate to make sure it moves freely and is nice and lubed up. (If you're installing a new plate you may want to just get a new bearing.)

That's all.
04-28-2008 02:23 AM
ntula
Re: installing a new pressure plate, some questions

sorry this got posted more than once...

Database Error
Please try again. If you come back to this error screen, report the error to an administrator.
Back

i kept getting this message... and then i found it had posted them every time...
04-28-2008 02:22 AM
ntula
installing a new pressure plate, some questions

installing a new pressure plate, some questions

so i am about to put a new pretty billet pressure plate in and i was wondering on
the installation and removal of the old one.

never done this before on a ducati.

besides loosening and then tightening them in a cross pattern, what else do i need to know.

i was also wondering on how i compress the springs so i can put the new ones in, what i
mean is, how far does the thread go out and how does one put the new screws and retainers in.
how tight should they be tightened. do i need to compress the springs to install, and if so can it
be done by just pushing on them.

i tried to search the topic but got a database error and as well got that when i tried to put this in the tech forum

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome