Ducati Monster Forums: Ducati Monster Motorcycle Forum

Ducati Monster Forums: Ducati Monster Motorcycle Forum (https://www.ducatimonster.org/forums/)
-   Accessories and Mods (https://www.ducatimonster.org/forums/accessories-mods/)
-   -   Ducati Monster alluminium tank (https://www.ducatimonster.org/forums/accessories-mods/354610-ducati-monster-alluminium-tank.html)

TECKNORACE 01-11-2019 10:32 PM

Ducati Monster alluminium tank
 
3 Attachment(s)
Hi guys I'm a producer of tanks, several months ago I built a tank for my client I wanted to share my work with you and know what you think

TECKNORACE 01-11-2019 10:35 PM

2 Attachment(s)
on the bike

drval85 01-12-2019 08:45 PM

Looks beautiful!!

09Aircooled 01-12-2019 11:00 PM

That looks sweet...could you make one like that for a newer monster, say an 09? If so how much?

cmross13 01-15-2019 07:40 AM

interested in cost for another? i also have an S4RS that suffers from yearly tank swaps due to swelling/warping

Monster4Lee 01-15-2019 07:32 PM

Very nice. Has to be expensive.
I'm curious how you make them. The process. Not that I want to do it myself.

Dukeofbratshire 01-15-2019 11:09 PM

Niiiice, I'm looking to change my tank. But I don't want the stock look. Would you be interested to make one for me? I can send u a couple of designs, but I'm not sure how u can get the sizes right.

breaddrink 01-16-2019 06:18 PM

I asked the same question on the other board..

"$2100".

"since the monster's tank is not very complicated I think we can produce at a cost of 2100 for the single piece, if there were several people interested, a little less could be done"

Rob.

TECKNORACE 01-16-2019 09:04 PM

Quote:

Originally Posted by Monster4Lee (Post 3162296)
Very nice. Has to be expensive.
I'm curious how you make them. The process. Not that I want to do it myself.

to make a tank we start from a sheet of aluminum sp 1,5mm then the various sections of the tank should be cut, we begin to beat all the parts, we only weld together the upper part and you can check it all out lower part and weld it all together

breaddrink 01-16-2019 09:58 PM

Quote:

Originally Posted by TECKNORACE (Post 3162322)
to make a tank we start from a sheet of aluminum sp 1,5mm then the various sections of the tank should be cut, we begin to beat all the parts, we only weld together the upper part and you can check it all out lower part and weld it all together

How do you map out the tank to know the sections to cut?

Do you have a sacrificial tank to cut up?


All times are GMT -5. The time now is 07:45 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome