Ducati Monster Motorcycle Forum banner

How To: Modifying Stock Exhaust

37K views 5 replies 4 participants last post by  Scottyyy 
#1 ·
#3 ·
It's pretty simple depending on your bike.
If your mufflers are the type with an aluminum sleeve you drill out the rivets, pop the end cap off, slide the sleeve off and use a sawzall and cut about a third of the muffler off.
Slide the sleeve back on, tap the end cap on, drill through the holes in the end cap into the sleeve and rivet the end cap to the sleeve.
Use aluminum rivets so they don't rust.
 
#6 ·
Hey, thank you for the video. Yeah, I didn't think about it sounding tinny with the cored mufflers...I'm not a fan of that either. I think I'll probably skip coring out the mufflers and keep the exhaust fully stock. I'm trying to sell the bike anyway, was just trying to think of something to allow me to enjoy the bike more while I have it. Thanks for the reply. :)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top