Ducati Monster Motorcycle Forum banner

796 suspension lowering

1K views 1 reply 2 participants last post by  Mik 
#1 ·
Hi i want to lower my 796 monster,so i am aware we can fit the 696 clevis to gain rear end drop,the question is how far do i drop the front forks through the triple clamps,its has been suggested approx 10mm ?? is this correct ?? Julz
 
#2 ·
I went the opposite way, I raised mine up via the 1100/796 clevis. I left the forks as is as the height was about 10mm.
Just measure the height difference via the 2 clevis if you want to be more exact.
I did notice the bike lean over more on the kickstand (as I went up). You may notice your lean may be less.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top