Tail Chop Bracket

[MonstaS4]

I need to know the spacing of the bolts that you want to mount it to center to center. I also need to know what width you want the bracket that mounts under your seat and how deep you want it. The plate mount is currently just under seven inches wide and the plate is under 5 inches wide. If you have autocad or something that can read a DXF, I can e-mail you that.

[MonstaS4]

I went and talked to the CNC guy and he has already got the bracket cut for mounting it under the stock tail (current 4 bolt pattern) We can take a look and see what it would take to mount it for a full tail chop and either...
a) Cut down the current design, mount that to a flat plate that mounts to you bike.

or

b) Write up a third CNC program to accommodate the full tail chop. The only problem is I would have to buy more stainless sheet stock to do this again and that is the catch. It is $50 for one and $56 for four (that is how I ended up with extras).

All I am trying to pay for here is the metal stock and the CNC time. That is the only reason we are able to keep the pricing so low. I'll keep everyone posted.

[Finger]

MonstaS4.. sorry but you can't load an image from your home computers local drive. You'll need to post it here on the DML or on some other web accessible location.

[MonstaS4]

Here it is.