» Buyers Guides |
|
|
|
» Links |
|
|
|
 |
|
04-30-2008, 09:40 PM
|
#1 (permalink)
|
|
Senior Member
Join Date: Jun 2005
Posts: 2,550
|
Let's Make a Deal !!!!!
O.K. as some of you know, I've bought back "my" '05 620... Woo-hoo!!!
The first thing I wanted to do was put the stock bars back on (with new 1 1/2" risers) because the Rizoma clip-ons didn't work for me comfort wise on trips of more than a couple of hours.
Somewhere along the way, though, my stock triple clamp disappeared so now I need - no, make that MUST - find a stock triple clamp for a 620 (an S2R800 triple would work too).
My "deal" is this: trade me your stock triple clamp for my Rizoma clip-on set, the catch being that you split the cost of making the swap. Scott's mechanic friend, Randy, thinks it will probably be no more than two or three hours of work.
Sounds complex, but it's pretty simple: I really need a stock triple clamp so... Let's Make a Deal ;D
Lisa
__________________
Monster 620 Dark: Termignoni slip-ons, Ohlins side mount steering damper, Rizoma clip-ons, Sachs adjustable rear shock; 14t front sprocket; DP air filter with opned air box; Dart Fly Screen; DP carbon fiber front fender, Monza belly pan, cam belt covers, heel guards, rear fender, side panels, and sproket cover; DP Touring Seat, and Aluminum Seat Cowl, Cookie's Tail Chop with Clear Alternatives integrated brake and rear turn signals; Kellerman front turn signals, Napolean bar end mirrors.
|
|
|
|
Sponsored Links
|
Advertisement
|
|
|
04-30-2008, 10:54 PM
|
#2 (permalink)
|
|
Banned
Join Date: Apr 2006
Posts: 939
|
Re: Let's Make a Deal !!!!!
awwe...here i thought you were going to sell your monster. damn it!  i'd be all over this if i had a bike though.
and i think Jacob was looking into some type of clip-on setup, and has stock bars on his s2r...not to volunteer him or anything... [cheeky] |
|
|
|
|
04-30-2008, 11:33 PM
|
#3 (permalink)
|
|
Senior Member
Join Date: Jul 2007
Posts: 841
|
Re: Let's Make a Deal !!!!!
Is that the cost to do both bikes??? Will a 900 do?? my bike has bryants old bars on it, just not sure about the tripple clamp. If so I am in. I need to see randy anyway. Sat randy is coming and he can look at the 900. I have to take him the 900 to do a 2 tire change, both sprokets and chain, plus change the rear rotor and pads.
__________________
Don't eat yellow snow!!!
|
|
|
|
|
05-01-2008, 06:34 AM
|
#4 (permalink)
|
|
Senior Member
Join Date: Jun 2005
Posts: 2,550
|
Re: Let's Make a Deal !!!!!
Yeah the cost for swapping the bars over would be split between me and whoever else wants to trade.
Randy looked at my bike and said it would probably be a pretty straight forward job but... there is always a chance it could be a can of worms once he gets into it. If my bike turns into to more of a pain and requires more time to solve, then I'd pay more.
So basically, I'm flexible on whatever happens with the install related to cost.
__________________
Monster 620 Dark: Termignoni slip-ons, Ohlins side mount steering damper, Rizoma clip-ons, Sachs adjustable rear shock; 14t front sprocket; DP air filter with opned air box; Dart Fly Screen; DP carbon fiber front fender, Monza belly pan, cam belt covers, heel guards, rear fender, side panels, and sproket cover; DP Touring Seat, and Aluminum Seat Cowl, Cookie's Tail Chop with Clear Alternatives integrated brake and rear turn signals; Kellerman front turn signals, Napolean bar end mirrors.
|
|
|
|
|
05-01-2008, 07:17 AM
|
#5 (permalink)
|
|
Senior Member
Join Date: Jul 2007
Posts: 841
|
Re: Let's Make a Deal !!!!!
Well if it works I'm in!! [cheeky]
__________________
Don't eat yellow snow!!!
|
|
|
|
|
05-01-2008, 08:57 AM
|
#6 (permalink)
|
|
Senior Member
Join Date: Aug 2005
Posts: 4,897
|
Re: Let's Make a Deal !!!!!
the operation is super straightforward, less then 2 hours for both bikes for sure unless you get hung up on pulling the bars off.
In fact, if you weren't changing bars, you wouldn't even have to pull the stuff off the bars, just move the whole assembly out of the way so you could get the triple off...
|
|
|
|
|
05-01-2008, 08:55 PM
|
#7 (permalink)
|
|
Senior Member
Join Date: Jun 2005
Posts: 2,550
|
Re: Let's Make a Deal !!!!!
Cool, that's good to know David.
Alan, let's talk at your BBQ on Saturday - think this could work out fine for both of us.
__________________
Monster 620 Dark: Termignoni slip-ons, Ohlins side mount steering damper, Rizoma clip-ons, Sachs adjustable rear shock; 14t front sprocket; DP air filter with opned air box; Dart Fly Screen; DP carbon fiber front fender, Monza belly pan, cam belt covers, heel guards, rear fender, side panels, and sproket cover; DP Touring Seat, and Aluminum Seat Cowl, Cookie's Tail Chop with Clear Alternatives integrated brake and rear turn signals; Kellerman front turn signals, Napolean bar end mirrors.
|
|
|
|
|
05-02-2008, 07:38 AM
|
#8 (permalink)
|
|
Senior Member
Join Date: Jul 2007
Posts: 841
|
Re: Let's Make a Deal !!!!!
Randy emailed me yesterday and said he couldn't make it so we'll have to look ourself. But yes we'll talk Sat!! [thumbsup]
__________________
Don't eat yellow snow!!!
|
|
|
|
|
05-02-2008, 08:30 AM
|
#9 (permalink)
|
|
Senior Member
Join Date: Jan 2008
Posts: 422
|
Re: Let's Make a Deal !!!!!
620 Triple will not work on an 01 900.
__________________
 <br /><br />Mods- DP Gel Seat, Rhinomoto Bar End Sliders, CRG LS, Gold Speedymoto Kukri PP, Rizoma Clutch Cover, 14 Tooth Sprocket, Full Arrow Carby's, Open Airbox, K&N Filter ,Tail Chop, DP ECU, Dyno Tune 132 rwhp 74 lb ft :O
|
|
|
|
|
05-02-2008, 08:57 AM
|
#10 (permalink)
|
|
Senior Member
Join Date: Aug 2005
Posts: 4,897
|
Re: Let's Make a Deal !!!!!
Quote:
|
Originally Posted by DesmonsterS4RS
620 Triple will not work on an 01 900.
|
:-[ oops, good catch, I wasn't paying attention to what bike alan had...
|
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
