OEM Ducati Monster 796 rearset peg brackets - BLACK (other parts available too) - Ducati Monster Forums: Ducati Monster Motorcycle Forum
Reply
 
Thread Tools Display Modes
post #1 of 11 (permalink) Old 01-14-2013, 02:10 PM Thread Starter
Senior Member
 
jmlenz's Avatar
 
Join Date: Sep 2012
Location: San Diego, CA
Posts: 342
OEM Ducati Monster 796 rearset peg brackets - BLACK (other parts available too)

These peg brackets are off my 2011 Monster 796 ABS. Bike had about 2000 miles when I switched over to S4R rearsets. These have been sitting around the garage ever since. They are the powdercoated black versions NOT the silver ones that come with the 696 and 1100 Monsters. Will fit all New Gen Monsters - 696, 796, 1100 except 1100EVOs. Comes with all bushings and foot pegs. These also include the brake lever but I did remove the little rubber foot grip. Rearset brackets are perfect but the right side one does have a little rash on the very bottom - I used a dab of black touch up and it is unnoticeable. I would give these a 9/10 in appearance. If you have looked then you know how expensive these are from the Ducati d(st)ealer!

$200 shipped anywhere in the 48 states.








I also have the following 796 parts if anyone wants to make an offer...

- OEM Risers ***SOLD***
- OEM handlebars ***SOLD***
- OEM Headlight assembly in mint condition with bulbs and harness (seperate post)
- OEM grips
- OEM 796 ABS ECU
- OEM turn signals for front and rear
- OEM exhaust valve actuator with cable
- OEM midpipe with flapper
- OEM exhaust canisters *
- OEM air filter, retaining cone, top hat

2011 Monster 796 ABS

Last edited by jmlenz; 01-28-2013 at 11:25 AM.
jmlenz is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 01-14-2013, 07:31 PM
Senior Member
 
malamikigo's Avatar
 
Join Date: Nov 2012
Location: Vancouver, Canada
Posts: 426
FYI, I've seen those headlight assemblies on ebay for close to $500. It's definitely a valued item that you should be able to fetch a mint for!


I like the rearset brackets....wish mine were black. I'd be interested but I'm pretty sure I can just get mine powdercoated black for less than sinkin 200 for yours.

Good luck!
malamikigo is offline  
post #3 of 11 (permalink) Old 01-16-2013, 12:20 PM Thread Starter
Senior Member
 
jmlenz's Avatar
 
Join Date: Sep 2012
Location: San Diego, CA
Posts: 342
Quote:
Originally Posted by malamikigo View Post
FYI, I've seen those headlight assemblies on ebay for close to $500. It's definitely a valued item that you should be able to fetch a mint for!


I like the rearset brackets....wish mine were black. I'd be interested but I'm pretty sure I can just get mine powdercoated black for less than sinkin 200 for yours.

Good luck!
Yes, the headlights are quite expensive. I figured I'd give forum members a go at it before I put it on eBay.

And your right about the rearsets, powdercoating the silver ones would be cheaper. It would be more of a convenience thing to buy these then sell your silver ones on ebay --- hence not having to deal with powdercoating and the required removal of pegs and bushings (which are a beotch trust me!) And the powdercoat on these is a direct match to the swingarm, almost a crinkle coat. Probably cant match that perfect if you do it yourself.

2011 Monster 796 ABS
jmlenz is offline  
post #4 of 11 (permalink) Old 01-16-2013, 05:46 PM
Senior Member
 
malamikigo's Avatar
 
Join Date: Nov 2012
Location: Vancouver, Canada
Posts: 426
True, true. I'll keep it in mind. I've taken the pegs off mine when I switched to some aftermarket pegs, but hadn't really considered the bushings.
malamikigo is offline  
post #5 of 11 (permalink) Old 01-16-2013, 10:32 PM
Member
 
Join Date: Mar 2012
Location: Dubai,UAE
Posts: 47
How much for the handlebar?


Sent from my iPhone using Motorcycle.com Free App
Alex796 is offline  
post #6 of 11 (permalink) Old 01-17-2013, 03:44 AM
Senior Member
 
Duc796canada's Avatar
 
Join Date: Aug 2010
Location: St Albert, Alberta, Canada
Posts: 296
Let's see what the bike looks like now

There are no extraordinary men, just extraordinary circumstances that ordinary men are forced to deal with.

Early 2011 Showa Forks 796 Red Monster(sans ABS)
15/41 gearing.
2006 GSXR 600 track bike.
Duc796canada is offline  
post #7 of 11 (permalink) Old 01-17-2013, 10:49 PM Thread Starter
Senior Member
 
jmlenz's Avatar
 
Join Date: Sep 2012
Location: San Diego, CA
Posts: 342
Quote:
Originally Posted by Alex796 View Post
How much for the handlebar?


Sent from my iPhone using Motorcycle.com Free App
PM sent

Quote:
Originally Posted by Duc796canada View Post
Let's see what the bike looks like now
Not much like what rolled off the assembly line

2011 Monster 796 ABS
jmlenz is offline  
post #8 of 11 (permalink) Old 01-21-2013, 11:22 AM Thread Starter
Senior Member
 
jmlenz's Avatar
 
Join Date: Sep 2012
Location: San Diego, CA
Posts: 342
handlebars are SOLD, still have brackets, riser, and headlight

2011 Monster 796 ABS
jmlenz is offline  
post #9 of 11 (permalink) Old 02-13-2013, 12:23 PM Thread Starter
Senior Member
 
jmlenz's Avatar
 
Join Date: Sep 2012
Location: San Diego, CA
Posts: 342
Headlight assembly, rearsets, and riser are ***SOLD***

2011 Monster 796 ABS
jmlenz is offline  
post #10 of 11 (permalink) Old 08-07-2013, 02:17 AM
Junior Member
 
Join Date: Aug 2013
Posts: 3
how much for the grips?
eashwar is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ducati Monster Forums: Ducati Monster Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome